manualshive.com logo in svg

TuffStuff CFM-550, Руководство пользователя

Поделиться
Скачать
TuffStuff CFM-550 Скачать руководство пользователя страница 14

FIG. 46      

Next, install a Nylon Pulley 4-1/2 Rd. (#45-Labeled I) into the 

pulley bracket located on the

 

Leg Extension Arm (#8)

 

and secure it into 

place using one Hex Head Cap Screw 3/8-16 X 1-3/4 (#73), two Flat 
Washers SAE  3/8”  (#60), and one Nylon Insert  Jam Lock Nut 3/8-16 
(#68).  Next, route the 

Leg Extension Cable (#28)

 under the Nylon Pulley 

4-1/2 Rd. (#45-Labeled I), then secure it into place using one Hex Head 
Cap Screw 1/4-20 X 1-1/2 (#63),  and one Nylon Insert Lock Nut 1/4-20 
(#64). 
 

Note:

 

Refer to 

Fig. C

 on  page  20 for further illustration of this 

assembly.

 

FIG. 45      

Next, attach the 

Lat Cable (#27)

 

to the 

Top Plate/ Selector 

Bar (#26)

 

and secure it into place using one Split Bolt 1/2-13 (#64), and 

one Split Washer 1/2” (#63).  Refer to 

Fig.  B

 on page  20 for further 

illustration of this hardware assembly. 
 

Fully Fasten

:

 Proceed to fully fasten this hardware assembly.

 

 

FIG. 44      

Next, route the 

Lat Cable (#27) 

through the 

Adjustable Pulley 

Bracket (#17) 

and  over the Nylon Pulley 4 1/2 Rd. (#45-Labeled  H), as 

shown above. 
 

Note: 

Use Cable Mapping Diagram on page 20 for further detailed 

illustration of the

 

Lat Cable (#27)

 

routing.

 

FIG. 47      

Next, route the 

Leg Extension Cable (#28)

 through the 

Front 

Upright (#5)

, then under the Nylon Pulley 4-1/2 Rd. (#45-Labeled J). 

Secure the Nylon Pulley 4-1/2 Rd. (#45-Labeled J) into place using one 
Hex Head Cap Screw 3/8-16 X 1-3/4 (#73), two Flat Washers SAE 
3/8” (#60), and one Nylon Insert Jam Lock Nut 3/8-16 (#68). 
 

Note: 

Use Cable Mapping Diagram on page  20 for further detailed 

illustration of the

 

Leg Extension Cable (#28)

 

routing.

 

FULLY FASTEN 

CFM-550 Compact Frontal Machine 

13 

Содержание CFM-550





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды