TSE DPT60, Руководство пользователя

Страница: 293 / 459

64
Series 90 Minor Repair
90000243 90000310
Charge Pump Inlet Reducer Fitting and
Gauge Port Plug
90000311 90000314
Integral Pressure Filter Head remote Pressure Filter
Manifold
90000315 90000312
Install Remote Pressure
Filter Manifold
Install Integral Pressure
Filter Head
90000313 90000316
Tighten Integral Pressure
Filter Head Lock Nut
Tighten Remote Pressure
Filter Manifold Lock Nut
Filtration Options
Suction Filtration Installation
1. Install the hydraulic fitting to connect the external
suction filter to the charge pump inlet port.
2. The reducer fitting (placed on the charge pressure
gauge port) is installed as follows.
e z i S e m a r F e z i S h c n e r W e u q r o T
2 4 0 - 0 3 0 h c n i 4 / 1 - 1 ) t f • f b l 2 5 ( m N 0 7
0 3 1 - 5 5 0 h c n i 2 / 1 - 1 ) t f • f b l 0 9 ( m N 2 2 1
0 5 2 - 0 8 1 h c n i 2 / 1 - 1 ) t f • f b l 5 1 1 ( m N 6 5 1
E 1 9 2 2 0 0 T
The gauge port plug takes a 1/4 inch internal hex
wrench and is torqued to 27 Nm (20 lbf•ft).
Remote Charge Pressure Filtration or Integral Charge
Pressure Filtration
Install either of these two filtration devices as follows.
1. Remove the reducer fitting, located at charge pres-
sure gauge port, from pump end cap (this part will not
be used).
2. Install the filter manifold or filter head into the port.
The hydraulic tube should enter its mating bore in the
pump end cap with a low force.
3. After rotating the filter manifold or filter head clock-
wise so that the threads engage with the threads in
the end cap, continue to rotate it clockwise between
6 and 7 revolutions. Face manifold or head to the
desired position.
Caution
Failure to install the filter manifold or filter head to a
sufficient depth in the end cap will result in insufficient
engagement of the tube in the end cap bore. This may
allow unfiltered oil to bypass the filter and enter the
charge system.
S000 021E
4. While holding the filter manifold or filter head in the
desired position, tighten the swivel lock nut.
e z i S e m a r F e z i S h c n e r W e u q r o T
2 4 0 - 0 3 0 h c n i 8 / 3 - 1 ) t f • f b l 2 5 ( m N 0 7
0 3 1 - 5 5 0 h c n i 8 / 5 - 1 ) t f • f b l 0 9 ( m N 2 2 1
0 5 2 - 0 8 1 h c n i 8 / 5 - 1 ) t f • f b l 5 1 1 ( m N 6 5 1
E 2 9 2 2 0 0 T
5. After installing the integral pressure filter head as-
sembly, install the filter canister per the instructions
on the filter canister.