TSE DPT60, Руководство пользователя

Страница: 140 / 459

Service As Required
ZE59858,0000009 -19-20MAY13-1/1
Pre-Start Cleaning Guide
IMPORTANT: Before cleaning machine, allow ample
time for hot surfaces to cool.
IMPORTANT: Do not direct high-pressure spray from
hose output directly at or close to electrical
connections and sensors.
Rigorous cleaning as needed is recommended. Clean
more frequently during heavy machine use, and when
weather conditions are dry.
•
Check enclosed areas daily. Clean the engine and
other enclosed areas of equipment to remove debris
and any buildup of oil and grease. Keep the engine and
engine compartment free of combustible material.
•
Check for debris buildup daily on and around intake
systems, exhaust systems, and intercooler piping
systems. Verify that there are no holes or leaks in intake
or exhaust systems. Do not allow debris to build up
near hot exhaust components. Verify that hot exhaust
components are cleaned as often as environmental
conditions require.
•
Inspect cooling system daily to determine whether
cooling system needs cleaning. Visible buildup of
residue that blocks airflow may degrade machine
performance and requires more frequent cleaning
depending on environmental conditions.
•
Inspect difficult to observe areas daily as conditions
may require additional cleaning care to remove debris.
•
Check for oil and fuel leaks daily. Replace or repair any
sources of leaks, including gaskets, seals, breather
tubes, fittings, and fluid lines.
Maintenance and Service Reminders
•
Keep surfaces free of grease and oil.
•
Clean up after hydraulic and other fluid leaks.
•
Fuel Lines — Check for leaks, cracks, and kinks that
require service before use.
•
Fuel Pumps — Check fittings, especially compression
ring couplings, for cracks and leaks.
•
Fuel Injectors — Check pressure and return lines for
signs of leaks.
•
When servicing fuel filter or draining water separator,
avoid fuel spills. Immediately clean up any fuel spill.
•
Handle transmission and power steering fluids with
care. Immediately clean up any spills, especially around
fill points.
•
Check for transmission case venting system seepage,
transmission case leakage, power steering cylinder
leakage, or power steering line leakage.
•
Check for loose electrical connectors, damaged wiring,
corrosion, and poor connections.
65-4 032015
PN=93