TSE DPT60, Руководство пользователя

Страница: 240 / 459

11
Series 90 Functional Description
Displacement Limiters
All Series 90 pumps are designed for optional mechanical
displacement (stroke) limiters. The maximum displace-
ment of the pump can be limited in either direction.
The setting can be set as low as 0° in either direction.
For instructions on adjustment see corresponding Sec-
tion.
Auxiliary Mounting Pads
Auxiliary mounting pads are available on all Series 90
pumps. SAE A through E mounts are available (availabil-
ity varies by pump size). This pad is used for mounting
auxiliary hydraulic pumps and for mounting additional
Series 90 pumps to make tandem pumps. The pads allow
for full through-torque capability.
Filtration Options
All Series 90 pumps are available with provisions for
either suction or charge pressure filtration (integral or
remote mounted) to filter the fluid entering the charge
circuit.
Suction Filtration
The suction filter is placed in the circuit between the
reservoir and the inlet to the charge pump. When suction
filtration is used, a reducer fitting is placed in the charge
pressure gauge port (M3). Filtration devices of this type
are provided by the user.
Charge Pressure Filtration
The pressure filter may be integrally mounted directly on
the pump or a filter may be remotely mounted for ease of
servicing.
A 125
µ
m screen, located in the reservoir or the charge
inlet line, is recommended when using this filtration
option.
90000244
PV with Displacement Limiters
90000243
PV with Suction Filtration
(No filtration device attached)
90000246
PV with Integral Charge
Pump
90000247
PV with Auxillary Mounting Pad
90000242
PV with Remote Charge
Pump