Rev: B
Vizion Install Appendix E C180, C182-
C182D, C185
TruTrak Doc: 255
25
Figure 3-17
23.
Insert and tighten the cable retention clamp on the servo connector backshell
as seen in Figure 3-18.
Figure 3-18
24.
Connect the pitch servo connector.
25.
Connect the Sheathed Microfit Cable Assembly 1M (P/N 6000-064) to the PMA
link sensor (P/N 8000-177) and pitch servo (P/N 8100-064 for 12 volt or P/N
8100-065 for 24 volt).
26.
Secure the Sheathed Microfit Cable Assembly 1M (P/N 6000-064) so that
routing is as shown in Figure 3-19 and Figure 3-20. The cable will be secured
to the pitch push rod using a cable tie. Ensure that cable is free to move as the
link sensor moves through full control deflection without excess pressure on
the connector.
