Rev: B
Vizion Install Appendix E C180, C182-
C182D, C185
TruTrak Doc: 255
21
Figure 3-10
5.
Using a #19 bit match drill the lower fuselage skin to the 9 holes on the flanges
of Early 18X Pitch Bracket (1450-129). After drilling each hole secure the
bracket to the fuselage using a cleco.
6.
Remove the bracket from the aircraft and deburr the mounting holes.
7.
Attach the 2.75” PMA Servo Arm Assembly (P/N 7200-106) to the 60 inch/lb
PMA servo (P/N 8100-064 for 12 volt or P/N 8100-065 for 24 volt) using the
provided 8-32 x 3/8” flat head screws. Use blue threadlocker (Loctite 242 or
equivalent) and torque the screws to 18-20 in-lb.
8.
Remove the 2 jack screws from a 60 in/lb PMA servo (P/N 8100-064 for 12
volt or P/N 8100-065 for 24 volt) and install 2 of the hex head slide lock jack
screws included in the wiring harness kit. Use blue threadlocker (Loctite 242
or equivalent) and torque the screws to 2-3 in-lb.
Figure 3-11
