Trust SpaceC@m 300
16
5. Using the camera and the applications
5.1
Trust SpaceC@m 300 Software
The 'Trust SpaceC@m 300' program is installed during the installation of the camera. Follow the instructions
below for the use of this program.
5.1.1 Description of the functions
1. Go to ‘Start - Programs - Trust - SpaceC@m 300' and click on ‘Trust SpaceC@m 300’.
2. Figure 22 will appear. See the table below for the description of the program's functions.
Figure 22: SpaceC@m 300 Software
Function
Description
A
The present camera image is shown in this screen. See chapter 4.1.2 to adjust the
image.
B
‘Snapshot’ button: Takes a snapshot of the image (A). The snapshot taken is shown in
screen (G) and added to the 'Thumbnails' (H). You can also take a snapshot using the
button on the camera.
C
‘Transfer’ button: Opens the snapshot that is shown in the screen (G) in the image editing
program that you have selected (F). See chapter 4.2. for the use of this program.
D
‘Format’ button: Selects the file format used to save the snapshot. You can choose
between BMP and JPEG. You can also adjust the image compression for a JPEG image.
E
‘Exit’ button: Closes the program
F
Shows the program selected in which the snapshot (G) is opened if you click on the
'Transfer' button (C).
G
The snapshot is shown in this screen.
