Trox Technik X-CUBE X2, Руководство по транспортировке и установке

Страница: 27 / 89

Fig. 18: Connecting AHU casing units
4. Connect upper and lower AHU casing units with
connecting sheet ( Fig. 18 /1) and socket head
screws M6 ( Fig. 18 /2).
With intermediate frame
5. When the installation of the lower casing units is
completed, place the first upper casing unit with
lifting gear, e.g. a crane, in the appropriate instal-
lation position (see enclosed drawing),
Ä
‘Using
transport tubes’ on page 15 . If there are several
upper AHU casing units, install them one after
another before putting on additional casing units.
6. Screw-fix (3) the intermediate frame (4) of the
upper casing unit to the ceiling panel of the lower
unit (2).
7. If there are several upper casing units, join the
module connectors and the frames with screws,
Ä 26
Setup and assembly
Setting up and assembling the air handling unit > Assembling AHU casing units
Air handling unit X-CUBE X2 / X-CUBE X2 compact 27