Trox Technik X-CUBE X2, Руководство по транспортировке и установке

Страница: 18 / 89

Transport on transport brackets
Personnel:

Crane driver
Protective equipment:

Industrial safety helmet

Protective clothing

Safety shoes

Protective gloves
WARNING!
Danger of death from the fall of AHU casing
units.
If you overload lashing points or lifting gear, the load
may fall down. You or others could be killed.
– Use all the lashing points provided.
– Use only adequate lifting gear and slings.
– Stand clear of suspended loads.
The number of transport brackets on the AHU casing
unit ( Fig. 6 /1) determines the number of lashing points
to be used.
Fig. 6: Travel stop on transport brackets
1. Hook slings ( Fig. 6 /2) into transport brackets.
NOTICE!
Risk of damage to property due to the
incorrect handling or lifting of units!
Take proper precautions when you use a crane
to move or lift parts or components of an air
handling unit as otherwise they may be dam-
aged.
Note:
– Suspend (distribute) the load symmetri-
cally, i.e. in such a way that its centre of
gravity is beneath the crane hook.
– Spread the slings (wire ropes or chains)
near the roof with suitable spreading
devices, e.g. a spreader beam ( Fig. 6 /3).
– Do not spread slings by more than 60°.
– Ensure that the slings cannot damage the
AHU casing unit. Protect the edges of the
AHU casing units with wood blocks
( Fig. 6 /4) for example.
2. Slowly lift the load and start moving.
3.4 Storage and functional integrity
3.4.1 Bearing
NOTICE!
Risk of damage to property due to corrosion!
Insufficient ventilation due to film packaging can
result in condensation and, hence, oxidation on
galvanised surfaces, e.g. white rust.
– Remove film packaging immediately after
delivery.
– Store all units in a dry, well-ventilated place.
In the case of Sendzimir-galvanised units, corrosion
may occur on the cut edges. Reddish or whitish dis-
colouration of the cut edge does not indicate prob-
lematic corrosion. Corrosion protection is still guar-
anteed. This does not indicate a reduction in quality
and there are no grounds for complaint.
Please note the following storage conditions:

Do not store outdoors.

Store in a dry and dust-free place that is not
exposed to sunlight.

Storage temperature: -10 °C to +50 °C; avoid
sudden/major fluctuations in temperature.

Provide unpackaged units with protective packaging
and ensure sufficient ventilation in order to prevent
condensation.

Seal openings in the units to ensure that no dust or
vermin can get inside.

Do not expose the units to aggressive operating
fluids.
Transport and storage
Storage and functional integrity > Bearing
Air handling unit X-CUBE X2 / X-CUBE X2 compact 18