Trox Technik X-CUBE X2, Руководство по транспортировке и установке

Страница: 17 / 89

3. Place the slings ( Fig. 5 /4) around the ends of the transport tubes.
Position slings between the base frame ( Fig. 5 /6) and the screws ( Fig. 5 /2).
Protect the edges with wood blocks ( Fig. 5 /3). If a unit with a roof ( Fig. 5 /5) is to be moved, use wood blocks
that are thick enough to provide a distance of 100 mm between the sling and the casing unit.
Spread the slings near the roof with a suitable device ( Fig. 5 /7), e.g. a spreader beam.
Note:

Do not spread slings by more than 60°.

Ensure that the slings cannot damage the AHU casing unit.

Suspend (distribute) the load symmetrically, i.e. in such a way that its centre of gravity is beneath the crane
hook.
NOTICE!
Risk of damage to property due to the incorrect handling or lifting of units!
Take proper precautions when you use a crane to move or lift parts or components of an air handling unit
as otherwise they may be damaged.
– Protect the edges of the AHU casing units with wood blocks.
– Spread the slings (wire ropes or chains) near the roof with a suitable device, e.g. a spreader beam.
4. Slowly lift the load and start moving.
Transport and storage
Moving packages > Moving packages with a crane
Air handling unit X-CUBE X2 / X-CUBE X2 compact 17