Trotec TAC XT 18, Оригинальное руководство пользователя

Страница: 7 / 59

EN 7 vertical heater TAC XT 18 / TAC XT 27
Functioning principle
The air is taken in by the fan via the air inlet with air filter and
will be heated by means of the multi-stage electric heating.
Optionally, the heated air can be purified with a HEPA filter.
Afterwards, the air will be evenly distributed throughout the
room via the blowing-out tower. The device can also be
connected to a ventilation system using an attachment hood on
a hose connection.
For the purpose of pest control, no HEPA filter should be
installed on the device, so as to allow for a maximum air flow
rate.
If the device is operated with a ventilation system, the use of an
external thermostat (HG 125 - 6.100.002.042) is required.
The blowing-out temperature (identical to the supply
temperature) can be set up to maximally 95 °C. The
temperature sensors at the air inlet and the air outlet regulate
the adjusted room temperature within a narrow range as they
activate or disactivate additional individual heating elements.
Device depiction
1
2
3
7
8
9
10
4
6
5
No. Designation
1 Blowing-out tower (DualDecon version depicted)
2 Connections and main switch
3 Wheel
4 Power connection 2
5 Power connection 1
6 Transport handle
7 Foot
8 Air inlet with air filter
9 Display and button
10 HEPA filter