Trotec TAC XT 18, Оригинальное руководство пользователя

Страница: 15 / 59

EN 15 vertical heater TAC XT 18 / TAC XT 27
22. Press the Back button twice to return to the Comfort
heating configuration screen.
Pest control
Note
Different pests require different approaches of pest
control. By variation of the temperature and by heating,
thermal pest control can be adapted to the pest
infestation and the room situation.
With the pest control function (PestControl) the pests in the
room where the device is installed are killed off.
1. Press the following buttons in the main menu to carry out
settings regarding the pest control function:
ð Configuration
ð
Configuration
ð
Pest control configuration
ð
The following screen will appear, allowing you to carry
out settings regarding the pest control function:
Back
Fan control
Setpoints
Ramp
Configuration PestControl
2. Press the Setpoints button.
ð
The following screen is shown:
Back
60 °C
30 Min
Pest control setpoint
Target temperature
Treatment duration
Configuration
3. Press the Target temperature button in the Pest control
setpoint screen.
4. Press the °C-specification button to alter the target
temperature on the next screen via the arrow buttons.
5. Press the Treatment duration button.
6. Press the Min specification button to alter the treatment
duration on the next screen via the arrow buttons.
7. Press the Configuration button on the Pest control setpoint
screen to save the settings.
8. Press the Back button to return to the Pest control
configuration screen.
9. Press the Fan control button.
10. Press the % specification button on the Fan control screen
to alter the fan setpoint via the arrow buttons on the next
screen.
11. Press the Back button to return to the Pest control
configuration screen.
12. Press the Ramp button to set the ramp for pest control.
ð
The following screen is shown:
12.3 °C/h 123 Min
Time-controlled Increase
Ramp type
Off
Back
13. Press the Time-controlled or Increase button on the Ramp
type screen.
ð
If the Time-controlled button is activated, you can alter
the ramp time. Press the Min specification button to
alter the ramp time on the next screen via the arrow
buttons. After switching on the device, the room
temperature setpoint is increased from the current room
temperature at switch-on to the target temperature
within the ramp time set.
ð
If the Increase button is activated, you can also alter the
ramp time. Press the Min specification button to alter
the ramp time on the next screen via the arrow buttons.
The room temperature setpoint is raised with the
increase specified, starting from the current room
temperature at switch-on until the target temperature
has been reached.
14. Press the Back button twice to return to the Pest control
configuration screen.
HEPA filter operation
If HEPA filter operation is activated, the room air is purified with
the integrated H14 HEPA filter (optional).
1. Press the following buttons in the main menu to carry out
settings for HEPA filter operation:
ð
Configuration
ð
Configuration
ð
HEPA filter operation configuration
ð
The following screen will appear, allowing you to carry
out settings regarding HEPA filter operation:
Back Setpoints
Supply air limitation
Heating Timer operation
HEPA filter operation configuration
Filter regeneration
2. Press the Setpoints button.
ð
The following screen is shown:
Back
20 °C
20 °C
33%
Hepa filter operation setpoint
Room temperature
Outlet temperature
Fan
Configuration