Trotec TAC XT 18, Оригинальное руководство пользователя

Страница: 17 / 59

EN 17 vertical heater TAC XT 18 / TAC XT 27
Recommendations for filter regeneration:
Under normal environmental conditions, such as those
prevailing in offices, schools, kindergartens or public buildings,
it is sufficient to regenerate the filter once a week. If the air
cleaner is used in cool areas with high humidity levels, e.g. in
slaughterhouses or in the food industry in general, we
recommend to regenerate the filter daily.
Note
During decontamination, an odour may be produced,
which is harmless.
Note
The software monitors whether filter regeneration is
carried out regularly. After 50 hours of air cleaning
operation, a message appears with the option of
starting filter regeneration immediately. If filter
regeneration is not started at this time, the number of
days by which filter regeneration is overdue will be
displayed each time the device is switched on.
Surface decontamination
Surface decontamination allows to thermally decontaminate a
variety of different surfaces within closed rooms. In this
operating mode, the room is heated to the temperature set
before. The temperature level is maintained for a defined time.
1. Press the following buttons in the main menu to carry out
settings regarding the surface decontamination function:
ð
Configuration
ð
Configuration
ð
Configuration surface decontamination
ð
The following screen for setting surface
decontamination will appear.
Back
Fan control
Setpoints
Configuration surface decontamination
2. Press the Setpoints button.
ð
The following screen is shown:
Back
65 °C
60 Min Target temperature
Treatment duration
Surface decontamination setpoint
Configuration
3. Press the Target temperature button on the Surface
decontamination setpoint screen.
4. Press the °C-specification button to alter the target
temperature on the next screen via the arrow buttons.
5. Press the Treatment duration button.
6. Press the Min specification button to alter the treatment
duration on the next screen via the arrow buttons.
7. Press the Configuration button in the Surface
decontamination setpoint screen to save the settings.
8. Press the Back button to return to the Surface
decontamination configuration screen.
9. Press the Fan control button.
10. Press the Fixed speed button or Auto button in the Fan
control screen.
ð
If the Fixed speed button is activated, press the %
specification button to alter the fan setpoint in the next
screen via the arrow buttons.
ð
If the Auto button is activated, the fan setpoint is
calculated as a function of the current room
temperature. With an increasing room temperature, the
fan speed of 33% increases in a linear fashion.
11. Press the Back button twice to return to the Surface
decontamination configuration screen.
Room decontamination
With the room decontamination function, objects can be
thermally decontaminated within closed rooms. This operating
mode is very similar to the surface decontamination mode.
However, different values are preset for room decontamination,
which are optimised for the decontamination of batches (e.g.
clothing).
1. Press the following buttons in the main menu to set room
decontamination:
ð
Configuration
ð
Configuration
ð
Room decontamination configuration
ð
The following screen for setting room decontamination
will appear:
Back
Timer operation
Room decontamination configuration
Setpoints
2. Press the Setpoints button.
ð
The following screen is shown:
Back
70 °C
30 Min Target temperature
Fan
Room decontamination setpoint
Configuration
3. Press the Target temperature button in the Room
decontamination setpoint screen.
4. Press the °C specification button to set the target
temperature in the next screen via the arrow buttons.