Trotec TAC XT 18, Оригинальное руководство пользователя

Страница: 13 / 59

EN 13 vertical heater TAC XT 18 / TAC XT 27
Setting the time
1. Press the following buttons in the main menu to set the
time:
ð
Configuration
ð
System settings
ð
Clock setting
2. Use the arrow buttons to set the time.
ð
The settings are applied immediately.
3. Press the Back button to exit the time settings.
Display
1. Press the following buttons in the main menu to make
touchscreen settings:
ð Configuration
ð
System settings
ð
Touch/display
2. Adjust the settings as desired:
ð
Contrast : Use the arrow buttons to set the contrast.
ð
Touch beep on/off : Press the button to switch the touch
tone on or off.
3. Press the Back button to return to the main menu.
Device functions
The device comes with the following device functions:
• Room frost protection
• Comfort heating
• Pest control
• Surface decontamination
• HEPA filter operation
• Room decontamination
Room frost protection
The room frost protection function serves to keep a room free of
frost.
1. Press the following buttons in the main menu to carry out
settings regarding the room frost protection function:
ð
Configuration
ð Configuration
ð
Room frost protection configuration
ð
The following screen will appear, allowing you to carry
out settings regarding the room frost protection
function:
Back
Room frost protection configuration
Fan control
Setpoints
2. Press the Setpoints button.
ð
The following screen is shown:
Back
Room frost protection setpoint
Room temperature
Outlet temperature
Configuration
6°C
50°C
3. Press the Room temperature button on the Room frost
protection setpoint screen.
4. Press the °C specification button to set the room
temperature on the next screen via the arrow buttons.
5. Press the Back button to return to the Room frost
protection setpoint screen.
6. Press the Blowing-out temperature button on the Room
frost protection setpoint screen.
7. Press the °C specification button to set the desired
blowing-out temperature on the next screen via the arrow
buttons.
8. Press the Configuration button on the Room frost
protection setpoint screen to save the settings.
9. Press the Back button to return to the Room frost
protection configuration screen.
10. Press the Fan control button.
ð
The following screen is shown:
Back
On/off Duration
Fan control
45 %
11. Press the Duration or On/off button on the Fan control
screen.
ð
If the Duration button is activated, the device runs in
continuous operation. To carry out this setting, press the
% specification button on the Fan control screen to
adjust the fan operating time via the arrow buttons on
the next screen. Press the
Back button twice to return to
the Room frost protection configuration screen.
ð
If the On/off button is activated, the fan switches off
automatically once the room temperature exceeds the
setpoint by 1 °C. The fan is switched on again once the
room temperature drops below the setpoint by 1 °C.
Press the
Back button to return to the Room frost
protection configuration screen.