background image

GENERAL INFORMATION

89

Mirrors

 Warning

Never attempt to clean or adjust 

mirrors while riding the motorcycle. 

Removal of the rider’s hands from the 

handlebars while riding the motorcycle 

will diminish the ability of the rider to 

maintain control of the motorcycle.
Attempting to clean or adjust mirrors 

while riding the motorcycle may result 

in loss of control of the motorcycle 

and an accident.
Only attempt to clean or adjust the 

mirrors while stationary.

 Warning

Operation of the motorcycle with 

incorrectly adjusted mirrors is 

dangerous.
Operation of the motorcycle with 

incorrectly adjusted mirrors will result 

in loss of vision to the rear of the 

motorcycle. It is dangerous to ride a 

motorcycle without sufficient rearward 

vision.
Always adjust the mirrors to provide 

sufficient rearward vision before riding 

the motorcycle.

Blind Spot Radar Lights (if fitted)

The blind spot radar lights located on 

the mirrors are sealed, maintenance 

free LED units and are part of the 

mirrors. The mirrors must be replaced in 

the event of the failure of the blind spot 

radar lights. Always take care when 

cleaning the mirrors and lights.

Windscreen

 Warning

Never attempt to clean the windscreen 

while riding the motorcycle.
Removal of the rider's hands from the 

handlebars while riding the motorcycle 

will diminish the ability of the rider to 

maintain the control of the motorcycle.
Attempting to clean the windscreen 

while riding the motorcycle may result 

in loss of motorcycle control and an 

accident.

 Warning

Make sure that the windscreen is 

adjusted to the same position on both 

sides.
Riding the motorcycle with an 

incorrectly adjusted windscreen could 

cause loss of motorcycle control and 

an accident.

Note
The windscreen fitted to this motorcycle 

can be manually adjusted without the 

use of tools.

1

1.  Height adjustment handle

Содержание Tiger 1200 GT 2021

































































































































































































Отзывы: