Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 125 / 192

MAINTENANCE
125
Engine Oil Level Inspection
Warning
Never start the engine or run the
engine in a confined area.
Exhaust fumes are poisonous and can
cause loss of consciousness and death
within a short period of time.
Always operate the motorcycle in the
open air or in an area with adequate
ventilation.
Warning
If the engine has recently been
running, the exhaust components may
be hot to the touch.
Contact with the hot components may
cause damage to exposed skin.
To avoid skin damage, always allow the
hot parts to cool before touching the
exhaust system.
Note
An accurate indication of the level of
oil in the engine is only shown when
the engine is at normal operating
temperature and the motorcycle is
upright (not on the side stand).
3
4
2
1
1. Engine oil filler plug
2. Sight glass
3. Upper level (maximum)
4. Lower level (minimum)
To inspect the engine oil level:
▼
Start the engine and run at idle for
approximately five minutes.
▼
Stop the engine, then wait for at
least five minutes to allow the
engine oil to settle.
▼
Note the engine oil level visible in
the sight glass.
▼
When correct, engine oil should be
visible at a point between the upper
level and the lower level on the sight
glass.
▼
If it is necessary to top up the
engine oil level, remove the engine
oil filler plug and using a suitable
funnel, add engine oil, a little at a
time, until the level registered in the
sight glass is correct.
▼
Once the correct level is reached, fit
and tighten the engine oil filler plug.