Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 154 / 192

MAINTENANCE
154
Warning
Make sure the positive and negative
terminals do not come into contact
with each other.
Do not reverse the positive (+) or
negative (-) terminals.
Shorting the positive and negative
terminals, may cause the battery to
vent gas at a very high temperature.
Venting high temperature gas will
cause irreparable damage to the
motorcycle and or serious personal
injury or death.
8
10
9
4
3
2
6
7
5
1
1. Negative (black) battery lead (shaded
black)
2. Battery tray cover
3. Battery strap hook
4. Battery strap holder hook
5. Battery strap
6. Protective cap (folded back to show
fixing)
7. Starter solenoid (black) lead (shaded dark
grey)
8. Rear suspension unit lead
9. Positive (red) battery lead (shaded light
grey)
10. 40 Amp fuse holder
To install the battery:
▼
Fit the battery into the battery case.
▼
Refit the battery tray cover to its
original position, taking care not to
stretch, pull or trap any leads.
▼
Detach the battery strap from its
hook on the ABS hose retainer and
attach it to its hook on the battery
tray cover.
▼
Note that the starter motor solenoid
cable is connected to the battery
positive cable.
▼
Reconnect the battery, positive
(red) lead to the top surface of
the positive terminal. Tighten the
terminal to 4.5 Nm.
▼
Apply a light coat of grease to the
terminal to prevent corrosion.
▼
Cover the positive terminal with the
protective cap.
▼
Reconnect the battery, negative
(black) lead to the top surface of the
negative terminal. Tighten the fixing
to 4.5 Nm.
▼
Apply a light coat of grease to the
terminal to prevent corrosion.
▼
Make sure the 40 Amp fuse holder is
secured to the battery tray cover.
▼
Reconnect the rear suspension unit
lead.
▼
Refit the rider seat, see page 85.
▼
Refit the passenger seat, see
page 84.