Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 52 / 192

GENERAL INFORMATION
52
Settings - Riding Modes
The Riding Modes screen allows the
adjustment of the current riding mode
to suit differing road conditions and
rider preferences.
This menu option only allows the
adjustment of the riding mode that is
currently active and in use.
For more information on riding mode
configurations, see page 39.
0
N
12:34
PM
15
c
o
MPH
-5 RPM
X1000
12
10
8
6
4
2
0
440
mi
ABS
MAP
Traction Control
On-Road
RRIID DEERR
Off-Road
Road
Rain
Rain
Suspension
On-Road
To adjust the riding mode settings:
▼
Only in Rider mode, select between
On-Road and Off-Road by enabling
the required option. All other riding
modes will automatically show a list
of specified riding mode settings to
select from.
▼
Scroll down/up the specific riding
mode settings using the joystick to
highlight the required setting.
▼
Press the joystick centre to confirm.
The relevant setting menu is now
shown.
▼
Once the setting has been adjusted
accordingly, press the joystick
centre to confirm and return to the
main Riding Modes.
▼
Repeat the procedure to adjust any
other riding mode settings.
▼
Push the joystick left to return to
the previous menu.
Settings - Traction Control
The Traction Control (TC) system can
be temporarily disabled. The Traction
Control system cannot be permanently
disabled, it will be automatically enabled
when the ignition is turned off and then
on again.
To enable/disable the traction control:
▼
From the Settings menu, push the
joystick down/up to select the
Traction Control option.
▼
Push the joystick right to move the
slider dot to the right to enable
traction control.
▼
Push the joystick left to move
the slider dot to the left to disable
traction control.
For more information on traction
control, see page 65.
Settings - Triumph Shift Assist
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
changes and down-changes of gear.
The clutch must be used for stopping
and pulling away.
Triumph Shift Assist will not operate if
the clutch is applied or if an up-change
is attempted by mistake when in 6th
gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear change.