Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 130 / 192

MAINTENANCE
130
Note
If the coolant level is being checked
because the coolant has overheated,
also check the level in the radiator and
top up if necessary.
In an emergency, distilled water can be
added to the cooling system. However,
the coolant must then be drained and
replenished with D2053 OAT coolant as
soon as possible.
2
1
3
1. Expansion tank cover
2. Maximum mark
3. Minimum mark
To inspect the coolant level:
▼
Position the motorcycle on level
ground and in an upright position.
▼
Make sure that the engine is cold (at
room or ambient temperature).
▼
Check the coolant level in the
expansion tank. The coolant level
must be between the maximum and
minimum marks.
▼
If the coolant is below the minimum
level, the coolant level must be
adjusted.
Coolant Level Adjustment
Warning
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot.
When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure.
Contact with this hot, pressurised
coolant will cause scalds and skin
damage.
Caution
If hard water is used in the
cooling system, it will cause scale
accumulation in the engine and
radiator and considerably reduce the
efficiency of the cooling system.
Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
MIN
MAX
3
1
4
5
6
2
1. Spigots
2. Expansion tank cover
3. Expansion tank cap
4. Grommets
5. MAX mark
6. MIN mark