Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 138 / 192

MAINTENANCE
138
▼
Remove the reservoir cap and
remove the diaphragm seal.
▼
Fill the reservoir to the maximum
(MAX) level line using new DOT 4
brake fluid from a sealed container.
▼
Refit the reservoir cap making sure
that the diaphragm seal is correctly
fitted.
Rear Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorised
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake
performance potentially leading to loss
of motorcycle control and an accident.
The rear brake fluid reservoir is
located on the right hand side of the
motorcycle, forward of the silencer,
below the rider’s seat.
1
2
1. Maximum (UPPER) level line
2. Minimum (LOWER) level line
To inspect the rear brake fluid level:
▼
Check the level of brake fluid visible
in the reservoir.
▼
The brake fluid level must be kept
between the minimum (LOWER)
and maximum (UPPER) level lines
(reservoir held horizontal).
To adjust the rear brake fluid level:
▼
Clean the reservoir cap before
removing to prevent dust or dirt
entering the reservoir.
▼
Remove the reservoir cap and
remove the diaphragm seal.
▼
Fill the reservoir to the maximum
(UPPER) level line using new DOT 4
brake fluid from a sealed container.
▼
Refit the reservoir cap making sure
that the diaphragm seal is correctly
fitted.
Rear Brake Pedal Adjustment
Warning
The rear brake pedal may require
pressure to be applied to adjust it.
The rear brake pedal has sharp edges
that may cause injury to the hands
and fingers when applying pressure to
adjust it.
When adjusting the rear brake pedal
wear suitable gloves to avoid injury to
the hands and fingers.