background image

SAFETY FIRST

13

 Warning

Always make sure that the passenger 

footrests are fully extended when 

carrying a passenger.
Never carry a passenger without 

him or her using the fully extended 

passenger footrests.
Incorrect foot placement anywhere on 

the motorcycle instead of using the 

footrests may cause:
-  the passenger's feet or clothing to 

become entrapped

-  the passenger to be in contact with 

hot exhaust pipes.

Incorrect foot placement anywhere on 

the motorcycle instead of using the 

footrests will cause:

 

severe personal injuries to the 

passenger

-  

instability of the motorcycle that 

may cause an accident

-  damage to the motorcycle
-  damage to clothing.

 Warning

The bank angle indicators must not 

be used as a guide to how far the 

motorcycle may be safely banked.
This depends on many various 

conditions including, but not limited 

to, road surface, tyre condition and 

weather.
Banking to an unsafe angle may cause 

instability, loss of motorcycle control 

and an accident.

 Warning

Always replace the bank angle 

indicators before they are worn to 

their maximum limit.
Use of a motorcycle with bank angle 

indicators worn beyond the maximum 

limit will allow the motorcycle to be 

banked to an unsafe angle.
Banking to an unsafe angle may cause 

instability, loss of motorcycle control 

and an accident.

2

1

1.  Bank angle indicator
2.  Maximum wear limit

Содержание Tiger 1200 GT 2021

































































































































































































Отзывы: