Triumph Tiger 1200 GT 2021, Руководство пользователя, Страница: 145 / 192

MAINTENANCE
145
The tyre pressures shown on your
instruments indicate the actual tyre
pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tyre pressures when
the tyres are cold using an accurate
pressure gauge. Do not use the tyre
pressure display on the instruments.
Minimum Recommended Tread
Depth
Warning
Riding with excessively worn tyres is
hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When tubeless tyres, used without a
tube, become punctured, leakage is
often very slow. Always inspect tyres
very closely for punctures. Check the
tyres for cuts, embedded nails or other
sharp objects. Riding with punctured
or damaged tyres will adversely affect
motorcycle stability and handling
which may lead to loss of control or an
accident.
Check the rims for dents or
deformation. Riding with damaged or
defective wheels or tyres is dangerous
and may lead to loss of control and an
accident.
Always consult your authorised
Triumph dealer for tyre replacement,
or for a safety inspection of the tyres.
In accordance with the periodic
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tyre that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80 mph
(130 km/h)
2 mm (0.08 in)
Over 80 mph
(130 km/h)
Front 2 mm (0.08 in)
Rear 3 mm (0.12 in)