Can-Am DS250 Operator'S Manual Download | Manualshive

Page: 1 / 172

background image

Original Instructions

WARNING

THIS VEHICLE CAN BE HAZARDOUS TO OPERATE.
A collision or rollover can occur quickly, even during
routine maneuvers such as turning and driving on hills
or over obstacles, if you fail to take proper precautions.

SEVERE INJURY OR DEATH can result if
you do not follow these instructions:

•

BEFORE YOU OPERATE THIS VEHICLE, READ

THIS OPERATOR’S GUIDE, ALL ON-PRODUCT
SAFETY LABELS AND WATCH THE SAFETY VIDEO.

• NEVER OPER

ATE THIS VEHICLE WITHOUT

PROPER INSTRUCTIONS. Complete a certified
training course.

•

NEVER CARRY A PASSENGER. You increase
your risk of losing control if you carry a passenger.

• NEVER OPER

ATE THIS VEHICLE ON A PAVED

SURFACE. You increase your risk of losing control
if you operate this vehicle on pavement.

• NEVER OPER

ATE THIS VEHICLE ON PUBLIC

ROADS. You can collide with another vehicle if you
operate this vehicle on a public road.

• A

LWAYS WEAR AN APPROVED HELMET,

eye protection, and protective clothing.

•

NEVER USE WITH DRUGS OR ALCOHOL.
They slow reaction time and impair judgment.

• NEVER OPER

ATE THIS VEHICLE AT EXCESSIVE

SPEEDS. You increase your risk of losing control
if you operate this vehicle at speeds too fast for the
terrain, visibility conditions, or your experience.

•

NEVER ATTEMPT WHEELIES, JUMPS, OR OTHER
STUNTS.

WARNING

Read this guide thoroughly. It contains important safety information.
Minimum recommended operator's age:
DS 250 category G = 16 years old.
DS 250 category T = 14 years old under adult supervision or 16 years old.
Keep this Operator’s Guide in the vehicle.

2 1 9 0 0 1 6 1 9

Includes

Safety, Vehicle

and

Maintenance Information

Operator’s

Guide

DS 250

TM

20

16

2016

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

©2015 BOMBARDIER RECREATIONAL PRODUCTS INC. ALL RIGHTS RESERVED. PRINTED IN CANADA.

219 001 619

OPERATOR’S GUIDE DS 250 / ENGLISH
GUIDE DU CONDUCTEUR DS 250 / ANGLAIS

FAIT AU / MADE IN CANADA

U/M:P.C.

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

©2015 BOMBARDIER RECREATIONAL PRODUCTS INC. ALL RIGHTS RESERVED. PRINTED IN TAÏWAN.

219 001 619

OPERATOR’S GUIDE DS 250 / ENGLISH
GUIDE DU CONDUCTEUR DS 250 / ANGLAIS

FAIT À / MADE IN TAÏWAN

U/M:P.C.

DS 250

1
2
3
...
»

Summary of Contents for DS250













































































































































































Reviews:

No comments

Related manuals for DS250

Brand: Manfrotto Pages: 2

Brand: Manfrotto Pages: 2

Action Replay DSi

Brand: Datel Pages: 2

Merrytec MK054V RC Series

Brand: V-TAC Pages: 105

Brand: My Child Pages: 12

Brand: Exact solutions Pages: 40

Brand: GENUS Pages: 10

Brand: Pyle Pages: 4

Brand: Gared Sports Pages: 12

Brand: FixPosition Pages: 8

Brand: muth Pages: 10

Brand: ACEPER Pages: 2

DLD Wide Range II

Brand: VDO Pages: 84

TravelCharge Companion GO-Plus

Brand: Wagan Pages: 3

adaptiv mini ADVM-BM1

Brand: Connects2 Pages: 4

Brand: Osram Pages: 2

Brand: ULTIMATE SPEED Pages: 21

Brand: R&G Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands