Triumph NTO-10A, Руководство пользователя

Страница: 12 / 20

Page 12 of 20
23. Install hydraulic hoses
a. Connect the hydraulic hoses. Make sure all guides are in place on top of the top
rail for pulling the hoses through.
24. Operate the lift and apply pressure to the safety cut off to insure motor shuts off prioe to
any part of vehicle coming in contact with cut off bar. Adjust as needed.
25. Do not place any vehicle on the lift at this time. Cycle the lift up and down several times
to insure latches engage properly and all air is removed from the system. To lower the
lift, first raise the lift to clear the latches and then pull the two lock release cables and hit
the dump valve to lower the lift to the nearest lock. If latches are out of sync, tighten the
cable on the latch that engages first.
NOTE: Re-Check That All Hardware Has Been Properly Tightened