Triumph Adler LP 4230 Скачать руководство пользователя страница 5

Страница: 5 / 189

Legal Information

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE

PRINTER'S EMULATION MODE. The printer is factory-set to emulate

the PCL. The emulation mode can be changed.

Notice

The information in this guide is subject to change without notification.

Additional pages may be inserted in future editions.
The user is asked to excuse any technical inaccuracies or typographical

errors in the present edition.No responsibility is assumed if accidents

occur while the user is following the instructions in this guide. No

responsibility is assumed for defects in the printer's firmware (contents of

its read-only memory).
This guide, and any copyrightable subject matter sold or provided with or

in connection with the sale of the page printer, are protected by

part of this guide, or any copyrightable subject matter without the prior

written consent of TA Triumph-Adler is prohibited. Any copies

made of all or part of this guide, or any copyrightable subject must

contain the same copyright notice as the material from which the copying

is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is

trademark of Kyocera Corporation.Hewlett-Packard, PCL, and PJL are

registered trademarks of Hewlett-Packard Company. Centronics is a

trade name of Centronics Data Computer Inc. Adobe, Acrobat, Flash,

and PostScript are registered trademarks of Adobe Systems

Incorporated. Macintosh is a registered trademark of Apple Computer,

Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Microsoft Windows Server is a trademark of

Microsoft Corporation. PowerPC is a trademark of International Business

Machines Corporation. CompactFlash is a trademark of SanDisk

Corporation. ENERGY STAR is a U.S. registered mark. All other brand

and product names are registered trademarks or trademarks of their

respective companies.
This product was developed using the Tornado

™

Real Time Operating

System and Tools from Wind River Systems.
This product contains UFST

™

and MicroType

from Monotype Imaging

Inc.

CAUTION

NO LIABILITY IS ASSUMED FOR ANY

DAMAGE CAUSED BY IMPROPER INSTALLATION.

Содержание LP 4230






























































































































































































Результаты поиска

Содержание LP 4230

Отзывы:

Похожие инструкции для LP 4230

Бренды по названию

Популярные бренды

Triumph Adler LP 4230, Инструкция по эксплуатации

Результаты поиска

Содержание LP 4230

Отзывы:

Похожие инструкции для LP 4230

Бренды по названию

Популярные бренды