Triumph Adler CLP3316, Руководство по обслуживанию

Страница: 78 / 188

2HJ/2HK
1-4-28
(12) Paper is wrinkled.
(13) Offset occurs.
(14) Part of image is missing.
(15) Fusing is loose.
(16) Colors are printed offset to each other.
Print example Causes Check procedures/corrective measures
Paper curled. Check the paper storage conditions, replace the paper.
Paper damp. Check the paper storage conditions, replace the paper.
Print example Causes Check procedures/corrective measures
Deformed or worn cleaning blade in
the drum unit. Replace the drum unit. See page 1-5-13.
Wrong types of paper. Check if the paper meets specifications. Replace paper.
Print example Causes Check procedures/corrective measures
Paper damp. Check the paper storage conditions, replace the paper.
Paper creased. Replace the paper.
Drum condensation. Perform the drum surface refreshing. See page 1-3-17.
Flawed drum. Replace the drum unit. See page 1-5-13.
Flawed primary transfer belt. Replace the primary transfer unit. See page 1-5-22.
Print example Causes Check procedures/corrective measures
Wrong types of paper. Check if the paper meets specifications, replace paper.
Defective pressure for the heat roller
and press roller*
1
/press belt*
2
.
Check the fuser pressure springs. See page 1-5-26 /1-5-33.
Flawed heat roller or press roller*
1
/
press belt*
2
.
Replace the heat roller and press roller*
1/
press belt*
2
. See
page 1-5-26 /1-5-33.
*
1
: 16 ppm printer, *
2
: 20 ppm printer
Print example Causes Check procedures/corrective measures
The drum unit is not properly seated
in its position. Perform the color registration to correct (Refer to operation
guide).
The primary transfer belt is not in its
proper position or the primary transfer
unit is defective. Confirm the position of the primary transfer belt. Check the pri-
mary transfer unit.
Replace the primary transfer unit. See page 1-5-22.