18
Power Fit
®
Elite & Power Fit
®
Elite Deluxe
Issue
Cause
Fix
The Unit
does not work.
The Power Cord is not plugged into a power outlet.
Connect the Power Cord to a power outlet.
The Power Switch is in the Off position.
Place the Power Switch in the On position.
The Remote Control
does not work.
The Remote Control’s batteries are dead.
Replace the batteries.
The remote control is too far away from the Unit
’
s
Infared Receptor.
The effective distance of the Remote Control
is 6.56 feet.
The machine stopped
working suddenly.
The programmed exercise time ended.
Reset the exercise time.
The Unit is
not responding.
Too many commands were input at once and
the Unit cannot respond to all of them.
Turn off the Unit, wait 1 minute, and turn the Unit
back on again.
Maintenance & Cleaning
Troubleshooting
Before cleaning the Unit, make sure that the
Power Switch is off and that the Power Cord is
unplugged from the outlet.
• You can use a dry, clean broom or brush to
sweep dust from device.
• The exercise area can be cleaned with a slightly
wet cloth.
• Do not clean the Unit with corrosive substances
because they can damage the Unit.
• Clean the remote control with a clean cloth.
• If you are not using the Unit for a long time, put
it in its packaging box and store the box in a
cool, dry place. Remove the batteries from the
remote control.
• If
Power Fit
presents any issues that cannot be
solved using the solutions in the Troubleshooting
section, please contact Customer Service using
the contact information in the back of this manual.
PF_IB_TP_ENG_V1_191206.indd 18
12/6/19 5:42 PM
