manualshive.com logo in svg

Tripp Lite B064-008-01-IPG, Руководство пользователя

Поделиться
Скачать
Tripp Lite B064-008-01-IPG Скачать руководство пользователя страница 56

56

Upgrade Main Firmware 

The Upgrade Main Firmware sub-section is used to upgrade the 
firmware of the KVM switch. As firmware upgrades become 
available, they can be found on tripplite.com/support. To upgrade the 
KVM firmware, follow the steps below.

1. Go to tripplite.com/support to download the most current firmware 

and save it to a computer that is not connected to the KVM switch.

2. Logon to the OSD, and navigate to the 

Maintenance

 section, which 

will open with the 

Upgrade Main Firmware

 sub-section page 

displayed.

3. By default, the 

Check Main Firmware Version

 box is checked, 

which causes the KVM to check to see if the current firmware is 
newer than that of the firmware file you are using to upgrade the 
KVM. If the current version is newer, you will not be allowed 
to continue with the upgrade. If you wish to perform a firmware 
upgrade without checking to see if the current firmware version is 
newer than the upgrade file, simply uncheck this checkbox.

4. Click the 

Browse

 button, and then navigate to and select the 

firmware upgrade file you downloaded from the Tripp Lite website. 
When selected, the 

Upgrade Firmware

 button becomes active.

5. Click the 

Upgrade Firmware

 button to begin the firmware upgrade. 

As the upgrade proceeds, progress is shown in the 

Upload Progress

 

bar.

6. When the upload is complete, a pop-up appears stating 

System will 

reboot in a few seconds

. The KVM switch will reboot (this may 

take a few minutes), and the upgrade will be complete. In the event 
of a firmware upgrade failure, see the 

Main Firmware Upgrade 

Recovery 

section below.

Main Firmware Upgrade Recovery

Should the KVM firmware upgrade procedure fail, and the switch 
becomes unusable, follow the steps below to restore the KVM.

1. Power off the KVM.

2. Press and hold the 

Reset

 switch on the front of the unit.

3. Power on the KVM while holding down the 

Reset

 switch.

4. The KVM will be restored to the originally installed firmware 

version. You will now be able to access the KVM switch and try 
upgrading the firmware again.

OSD Operation 

(continued)

The Maintenance section is used to upgrade the B064-Series KVM Switch’s firmware, as well as the firmware of the Server Interface Units 
(SIUs) used to connect its ports to the installed devices.

Note: 

Super Administrators

 are the only users who are guaranteed access to the Maintenance section of the KVM. 

Administrators

 and 

Users

 can 

only access this function if they are given permission.

The Main Screen

The 

Maintenance

 section can be used to upgrade the KVM and 

SIU firmware, backup/restore system configuration and account 
information, ping network devices, and restore the KVMs default 
values. When selected, the 

Maintenance

 section opens with the 

Upgrade Main Firmware

 subsection displayed.

Maintenance

Содержание B064-008-01-IPG























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды