Trinnov Audio Altitude 32, Руководство пользователя

Страница: 75 / 167

75
6 OVERVIEW OF THE SETUP
PROCEDURE
The following summary provides an overview of the overall setup procedure that must be followed
for a smooth and successful setup of the Altitude
32
in a home theatre system.
A) Get ready for the installation
First of all, before you start, you must read carefully two key chapters that provide important information about
the Altitude
32 ‘s tools and settings, as well as very important tips and recommendations to perform the
acoustical measurements:
1. Read the whole chapter about the Altitude 32 ‘s Essential Tools and Settings;
2. Read the whole chapter Getting Ready for Calibration to get mandatory information on calibration
procedure.
B) Perform the installation
Once you’ve learned the tools & tips, you are ready to follow the setup procedure:
Please note: it is critically important to follow the steps in the specified order, otherwise the system will not
perform properly:
1. Specify the speaker layout in the Altitude 32 graphical user interface: choose and configure the speaker
layout. Send pink noise to verify that the routing of the speakers is correct.
2. Optional: if one or more speakers require multi-amplification: configure, calibrate and verify the Altitude 32 ’s
intelligent active crossovers.
3. Optimize the speaker system in the room:
a. Calibrate all the speakers with the Altitude 32 ’s automated measurement and optimization tools.
b. Optional: if required, Setup Bass Management for multiple speakers.
c. Setup Target Curves to reach the required frequency response.
4. Last but not least: verify the sound of the optimized speaker system.
All these steps are explained in detail in the following chapters.
NOTE: the setup procedure of the Altitude 32 can be performed:

With a VNC Client connected to the Altitude 32 through the network,

With a display, a mouse and a keyboard directly connected to the Altitude 32 ’s back panel.
However, the setup procedure cannot be performed with a web browser connected to the Altitude 32 ’s web-based
interface. Further details about the web interface are provided in the Introduction chapter at the beginning of this
document.
For a detailed step-by-step explanation of how to connect with a VNC Client, please see corresponding pages in the
Network Setup chapter. For additional details about connecting a display, a mouse and a keyboard, please refer to the
Introduction chapter at the beginning of this document.