Trinnov Audio Altitude 32, Руководство пользователя

Страница: 100 / 167

100
ADD A PEQ
To add a PEQ, click on the Add
↓
button. A new line will appear in the table. This line is a Parametric Equalizer band. You
can add as many bands as possible per channel.
The overall procedure to configure a PEQ is as follows:

Open the PEQ editor of the speaker (or driver) you want to edit;

Add as many band as needed using the Add ↓ ;

Set the parameters of each band as wanted or as needed by the speaker’s manufacturer. The parameters are
explained bellow;

Eventually control the result with the pink noise using the button ;
 If needed, save the settings as an EQ group, this makes easier to duplicate a setting on several speakers
(procedure explained later in this chapter);
 Close the PEQ editor with the Ok button at the bottom of the page.
Each PEQ band has the following parameters:

Filter Type:
o
The peak notch: Parametric equalizers are multi-band variable equalizers which allow users to control
the three primary parameters: amplitude, center frequency and bandwidth.
o
The shelving high (1st or 2nd order): Shelving high filters cut or boost all frequencies equally above a
desired cutoff point.
o
The shelving low (1st or 2nd order): Shelving low filters cut or boost all frequencies equally below a
desired cutoff point.

Frequency: the center of the frequency range to be cut or boosted

Gain: the amount of boost or cut (in dB)

Q: the "sharpness" of the boost or cut. Higher Q meaning a narrower filter (not available for shelving second
order)
 Order (Only available for High and Low shelving filters): The order of a shelving filter is changing the shape of
the curve.
The PEQs are saved in a presets.
DELETE A PEQ
To delete a PEQ band, please click on the Delete button at the end of the line. Delete a band is a definitive
action that cannot be undo.