Trinnov Audio Altitude 32, Руководство пользователя

Страница: 123 / 167

123
12 CALIBRATE THE ACTIVE
CROSSOVERS (OPTIONAL)
This chapter explains how to calibrate the active crossovers included in the Altitude 32 . It assumes
that you are familiar with active crossovers and multi-amplified speakers, and is not intended as a
course. If you are not using the active crossover functionality of the Altitude 32 , please skip to
the next chapter.
IMPORTANT NOTE: Read carefully the whole chapter about the Altitude
32
’s Essential Tools and Settings
that you’ll be using throughout the calibration process.
NOTE: Master 44.1 kHz or 48 kHz clock modes should be used for calibration (Master 48kHz highly
recommended).
12.1 OVERVIEW OF THE CROSSOVER SETUP
PROCEDURE
The overall setup and calibration process of the Altitude
32
’s active crossovers performed through 2 different tools:

Use the Speaker/Room Setup Tool to:

Configure the number of ways and the crossover frequencies;

Verify the routing of the Altitude
32
’s outputs to the correct drivers.

Use the Setup/Active Xovers page of the Advanced Settings interface to:

Configure the advanced crossover settings such as specific frequencies for each driver and the type of filters
(optional);

Use the Processor/Meters page to adjust the master output level;

Perform the automated calibration of the active crossover: this will automatically determine the level, delay and
polarity of each driver;

Manually adjust levels, delays and polarities of each driver.
The first 2 steps of this process were explained in the previous chapter. This chapter explains the next steps.