Trinnov Audio Altitude 32, Руководство пользователя

Страница: 153 / 167

153
17.5 ADVANCED OPTIMIZATION SETTINGS
IMPORTANT NOTE: Change these settings only if you know what you’re doing. Random changes can
lead to unexpected results.
The Altitude
32
provides a large set of advanced settings in the Optimizer Settings/Settings/Advanced Settings page:
DISPLAY
The Display smoothing defines the smoothing value used to display the before an after Amplitude Response in the
Optimizer Graphs as well as in the pdf document generated while saving preset. Its default value is (1/3 octave). A smaller
value, such as 1/12 octave, can be used to display more details in the frequency response.
FRONT & SURROUND SPEAKER SETTINGS
The following features can be separately enabled/disabled for the front speakers
and for the surround speakers:

Early reflections correction;

Energy response correction;

Delay alignment, e.g. surround delay alignment may or may not be
required depending on the application and recommendations;

Add decorrelation: the Optimizer can apply a decorrelation algorithm to
the surround channels in order to simulate the diffuse field created by a
belt of surround speakers;
 Remapping: In the case of several speakers are used with chanel, an so
the same amplifier, to create an array of speaker, the remapping won’t be
the best solution.
NOTE: Front
speakers are defined as
those whose azimuth is
below
90 degrees.
Conversely, Surround
speakers are defined as
those whose azimuth is
above 90 degrees.