Trinnov Audio Altitude 32, Руководство пользователя

Страница: 67 / 167

67
The following settings can be configured for each of your Source Configurations:
 Input Connectors: select the rear panel input(s) to which your source is connected.

Clock:
o
Default: the clock will run in master mode for analog inputs, in slave mode for digital inputs, and in
master mode for the network input.
o
Mast. Xk: set the clock to different master clock sampling rates (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz
or 96 kHz).
o
Sl. WC: set the clock to slave mode.

Output Connectors: select the outputs that you want to use to play this source:
o
AES 1-8: analog outputs 1-32 ( depends of your configuration ) and AES outputs 1-8 are
active simultaneously;
o
AES 1-16: AES outputs 1-16 are active; analog outputs are disabled;
o
AML: Audio Multi Link is active;
o
HDMI: HDMI outputs 1 & 2 are active simultaneously;
o
AES OLD 1-16: old routing used in the prerelease models. Do not use.

Digital Input Data:
o
Auto-detect: automatically detect whether the input is PCM or bit-stream;
o
Force PCM Audio: force the PCM audio format;
o
Force Bitstream Data: force the bitstream format to let the Altitude 32 decode the signal from the
player.

Channels: On non-HDMI source, you can select the channels you want to play
o
L,R
o
L,R,C
o
L,R,C,Lfe
o
L,R,C,Lfe,Ls,Rs
o
L,R,C,Lfe,Ls,Rs,Lrs,Rrs
 Listening Format: Select the default format you want to use with this source. The Altitude
32
will force to decode
and upmix (if possible) in this format.
o
Auto : Will automatically upmix in the corresponding format