Trinnov Audio Altitude 32, Руководство пользователя

Страница: 144 / 167

144
14.5 BASS MANAGEMENT SETTINGS FOR
INDIVIDUAL SPEAKER
The settings provided are similar to the Quick Setup menu but are adjustable on each speaker individually. Each speaker
has the following parameters:

The activation of each sub by ticking the Active box (recalculates the attenuation accordingly): The bass-
managed signal will be redirected to the ticked subwoofer(s);

Gain and Polariry These additionnal settings give the possibility to invert the polarity and adjust the gain of the
signal redirected to the subwoofer(s). These settings are only apply to the signal redirected to the subwoofer(s),
the signal going to the speaker remain unchanged;

Low Pass – Sub(s) : These settings will delimit the cutoff frequency under which the signal from the channel
will be redirected and played by the subwoffer(s). You can here select the type of filter (Linkwitz-Riley, Bessel
or Butterworth), the cutoff frequency and the slope use by this filter. These settings are only apply to the signal
redirected to the subwoofer(s);

High Pass – Satellites: This section will delemit the low-end cutoff frequency of the signal send to the satellites.
You can here select the type of filter (Linkwitz-Riley, Bessel or Butterworth), the cutoff frequency and the slope
use by this filter. These settings are only apply to the signal redirected to the Satellites.
NOTE: Bass Management mode must be set to On in order for these settings to be taken into account.
IMPORTANT NOTE: In the case there is no active sub for one or more speaker, the high-pass frequency
is still active. When full-band speaker is needed, please set the High-Pass filter type to None and it will
disable the filter.