Trinnov Audio Altitude 32, Руководство пользователя

Страница: 68 / 167

68
o
Dolby Surround : Will force the Dolby Surround upmix
o
Neural:X : Will force the DTS Neural:X upmix
o
Auro-3D: Will force the Auro-3D upmix.
o
Native : keeps the incoming format from the source
o
Upmix on native : Will automatically upmix in the corresponding format with the Legacy layout
o
Legacy : Will only use the bed (5.1 or 7.1)

Optimizer Preset: This parameter allows you to link a source to one of the preset you created.
o
No Change: no preset is associated to this source configuration;
o
1 to 29: choose one of the 29 presets to load a preset when this source is selected.

The following parameters are set, by default, to use the settings from the current preset:
o
Source (the format of the source)
o
Remapping Mode
For the following parameters, it is possible to choose between No Change, As in preset or to select one of the EQ
created and saved in the Processor/Output page during the fine tuning:

FIR EQ : Select a FIR EQ that has been saved in the Processor/Output page.

User EQ : Select a FIR EQ that has been saved in the Processor/Output page.

Input Levels

Output Delays
The Master Level can be left Unchanged (default setting) or set to a specific level.
Power-on Default: the selected source can be set as the default configuration to be loaded at power-on. Alternatively,
you can check the option Use last loaded source as power-on default source in order to keep the source that was used
before the last shut-down.
5.3 DEFAULT SOURCE CONFIGURATION
With factory preset, the Altitude 32 uses the last loaded source as power-on default source. This can be modified in the
Home/Sources Config page of the Advanced Settings Interface:
Select the vertical tab of the source you want to use as default source. Tick the Power-on Default checkbox. Press the
Save button to apply the new parameter of the source.