TH283X Series Operation Manual Ver1.4
46
4.1.12
DATA/TIME
When moving to the time zone, users can modify the system time.
4.2
LCR <FILE MANAGE>
TX6000 series instrument can save the user-set parameter to the nonvolatile
memory in the form of file, so when use the same setting next time user can load
a corresponding file to obtain the parameter set and used last time. By doing so,
it can save the time of setting parameter and improve the production efficiency.
Press [FILE MANAGE] to enter into the file manage page, shown as below:
4.2.1
Setup file for single-group component (*.STA)
40 groups of different single groups of component set file (*.STA file) can be
saved in the instrument, but external storage U-disk can display/operate 500
groups of different single groups of component set file (note: U-disc is an optional
accessory).
Use FILE MANAGE function on the following File menus, the following data will
be saved or loaded in the form of file, which are called *.STA file.
Control and setting parameter on <MEASURE SETUP> page
FUNCA
FREQ
LEVEL
RANGE
SPEED
Voltage BIAS
Current BIAS
TRIG
