TriContinent C24000, Руководство по эксплуатации продукта

Страница: 38 / 144

Command guidelines
38
Operating instructions
Command syntax
The syntax used in this manual for describing commands in the command
set is as shown here:
The symbols [ ], <>, ( ), and { } are not to be sent as part of a command.
Convention Description
[command] The name of the command; the command itself (or a string).
Commands are case-sensitive.
<n> Operand (command argument). For example, [A]<n> represents
the A (absolute move) command and operand <argument>. The
argument must be a value within the valid operand range.
0...6000 Valid operand range of numerical <argument>
(n) Default <argument>, if no argument is included in command when
issued
{n} Power-up default value
Note:
• If only a power-up default value is shown for an <argument>, both
default values are the same.
• If no default value is shown, there is none.
• If there is no default value for an <argument>, a value must be
included with the command for the command to be valid.