TriboServ Fle Pump4 Series, Оригинальное руководство пользователя

Страница: 8 / 53

Revision: 0
FlexxPump4 D
User Manual
08 EN-
2.5 Usage for the intended purpose
The following points must be observed for the intended purpose of using the FP4 D:
+ The FP4 D is exclusively approved for industrial use.
+ The FP4 D may be used exclusively in accordance with the technical data
(chapter 3.4).
+ Unauthorized structural alterations to the FP4 D are not permitted.
+ Read the user manual and act accordingly.
+ During operation of the FP4 D, a visual inspection of the FP4 D as well as of the
lubrication point must be carried out regularly. Any anomalies must be eliminated
immediately and the cause rectified.
+ Refilling the cartridge is not permitted.
+ The FP4 D may not be opened or disassembled.
+ Only lubricants approved by the manufacturer may be used.
+ Relevant regulations and rules on work safety, accident prevention and environmen-
tal protection must be observed.
+ Work and activities with and on the FP4 D are only permitted with appropriate authori-
sation (chapter 2.3).
All other uses than the aforementioned intended usage or the disregard of one of the
above points shall be deemed improper usage. In this case no liability and/or warranty
is assumed.
2.6 Warranty and Liability
If the following items are disregarded, all warranty and liability claims for personal injury
and/or damage to property are excluded:
+ Non-observance of the instructions for transport and storage;
+ misuse;
+ Improper or unperformed maintenance or repair work;
+ Improper assembly / disassembly or improper operation;
+ Operation of the FP4 D with defective protective devices and devices;
+ Operation of the FP4 D without lubricant;
+ Operation of the FP4 D with non-approved lubricant;
+ Operation of heavily contaminated FP4 D;
+ Modifications or alterations which may be carried out without the written permission of
TriboServ GmbH & Co. KG have taken place;
+ Opening and/or partial or complete disassembly of the FP4 D.