Revision: 0
FlexxPump4 D
User Manual
19
EN-
6.
Mounting
6.1
Preparations
Before starting to work, inform yourself in detail about the FP4 D using this user
manual; in particular about the general safety instructions (section 2.7). Prepare the
installation site carefully.
NOTICE
Pressurised air can damage the seals of the FP4 D and can
transport dirt and foreign matter into the FP4 D or the lubri-
cant.
§
Do not use pressurised air.
§
Make sure that there is no coarse dirt in the mounting area.
2. Remove the housing from the power unit
of the FP4 D.
Separate the housing from the power unit
by turning the retaining ring counterclock-
wise.
Make sure that no dirt, water or foreign
bodies enters the lubricant inlet.
6.2
Assembly
1. Condition as delivered
The FP4 D is delivered in a cardboard box.
Depending on the version ordered, further
accessories such as a lubricant cartridge or
additional tube connection parts are inclu-
ded.