Revision: 0
FlexxPump4 D
User Manual
21
EN-
5. Remove the protective cap on the side of
the FP4 D.
Remove the black protective cap from the
side of the electrical M12x1 interface.
6. Connect the electrical interface
Connect the FP4 D to the external power
supply or controller via the M12x1 interface
on the side of the FP4 D using a suitable
connecting cable.
Depending on the application, both
connection cables with straight or angled
sockets can be used.
Please refer to chapter 8.1 for the condi-
tion of the connection cable.
4. Assembling the housing on the power unit
of the FP4 D.
Place the dismantled housing on the FP4
D and press it onto the power unit.
Fasten the housing to the power unit by
turning the retaining ring clockwise.
The retaining ring must snap into place
when turning and be completely tightened.
