15
/52
14
3.3.3 HMX 884LP4K (310038) Connection Diagram
3.4 Connection Procedure
1
)
Connect HDMI sources (e.g. DVD) to HDMI inputs of the Matrix with High Speed + Ethernet HDMI cables.
2)
Connect auxiliary audio sources to the AUDIO IN ports with audio cables.
3)
Connect HDBaseT receivers (e.g. HRX 1LP4K) to the HDBaseT Output ports with CAT5e or higher.
4)
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the Matrix or the receivers with HDMI cables
5)
Connect speakers/earphones to AUDIO output ports
6)
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of either Matrix or far-end receivers. RS232
signal can be transmitted bi-directionally between Matrix and far-end receivers.
7)
The Matrix can collect IR signal sent by the included IR remote via its built-in IR sensor or through external IR receiver
connected to the IR IN/ IR OUT ALL/ IR ALL IN port. The IR signal can be transmitted bi-directionally between Matrix and
far-
end receivers.
8)
Connect an AC 100V~240V power outlet and the Matrix with the AC power cord or the Transformer adaptor on the
HMX 442LP4K, Select the correct Power Plug adaptor for your region
Note:
1)
Output audio is selectable via RS232 command Audio/[X]:[Y]. It’s free to select whether analogue audio or HDMI
audio to output. Default is HDMI audio. [Not applicable to HMX 442LP4K]
2)
IR receivers connected to IR IN & IR ALL IN should be with carrier. If not, send command %0900. or %0901.to activate
native carrier mode or force carrier mode in the IR matrix launched between Matrices and receivers.
Содержание HMX 442 LP4K
Страница 50: ...User Manual 50 52 Notes for your personal use...
Страница 51: ...Notes for your personal use 51 52...
