Triax HMX 442 LP4K, Руководство пользователя

Страница: 9 / 52

9 /52
8
2.1.3 Rear Panel HMX 442LP4K (310037) continued
No. Name Description
① IR ALL IN
Pug the IR Receiver in to the 3.5mm jack socket. The allows IR signals to
pass from the Matrix to each corresponding Receiver in the zone.
②
HDMI INPUTS 4 x HDMI type A female input sockets. Plug an HDMI cable from the
Source to any of the HDMI input Sockets.
③
IR OUT
Plug an IR transmitter into the 3.5mm jack socked marked up “IR OUT” on the matrix,
ensure that the required zone is chosen, these are clearly marked up. The IR sig-
nals are sent from the receiver in the zone to the matrix, these are passed
through to enable control of the Source.
④ OUTPUTS
a. IR IN : Plug an IR receiver in to the “IR IN” 3.5mm socket on the matrix. The IR
Signals are sent from the matrix to the receiver on thought to the IR
emitter.
b. COAX:
HDMI de-embedded digital audio output
c. RS232: Serial communications between matrix and the corresponding
HDBaseT™ receiver.
d. HDMI: HDMI Type A connectors, plug an HDMI cable in to the
output socket and connect it to either a local display or AVR.
e. HDBaseT™: Uses HDBT technology to convert HDMI to
CAT5e/6. Use with HRX 1LP4K receiver
f. Audio: HDMI de-embedded stereo audio output
IR All OUT
Plug IR Twin Blaster in to the 3.5mm jack marked as “IR ALL OUT”. This func-
tion allows IR signals to be sent from the zones back through the matrix to
control 3rd party equipment such as AVR’s
⑥
TCP/IP
TCP/IP port for unit control
⑦
RS232
Serial port for unit control, 9-pin female connector, connects with control
device such as a PC.
⑧
Power Indicator Front panel Illuminate Green when powered on and RED in Standby. RED
Power on Indicator on rear panel
⑨
DC24V
DC 24V power adaptor.
⑩
Ground
Ensure that the matrix is earth bonded
⑤