TRIATEK FMS-1655 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 70

background image

-

2

-

FMS-1655

GENERAL

Specifications

Triatek reserves the right to change product specifications without notice.

1

Internal sensor option only available on flush mount model FMS1655-F-x-x

2

This digit only applies to optional sensors specified in preceding digit

FCC Compliance Statement

These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee the interference will not occur in a particular installation. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

Caution: To comply with the limits for an FCC Class A computing device, always use the isolated power supply module and recommended interface

cables with this unit.

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the part responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

Please Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

This Class-A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe-A est conforme à la norme NMB-003 du Canada.

Part Number Guide

FMS1655

-

1

-

1

-

1

1

Case Style

Internal Sensor

1

# Remote Sensors

# Optional Sensors

2

S = surface

0 = no internal sensor

0 = no remote sensors (demo)

Blank = no optional sensors

F = flush

1 = standard internal sensor

1 = one standard remote sensor

1 = one optional remote sensor

T = thin

2 = two standard remote sensors

2 = two optional remote sensors

3 = three standard remote sensors

3 = three optional remote sensors

4 = four standard remote sensors 4 =four optional remote sensors

A = optional no-flow remote sensor

B = custom remote sensor

N = no remote sensors

«
...
7
8
9
10
11
...
»

Содержание FMS-1655







































































Отзывы:

Нет отзывов

Похожие инструкции для FMS-1655

Бренд: D-Link Страницы: 40

Бренд: FAAC Страницы: 12

SolarCell Remote

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 20

Бренд: Baader Planetarium Страницы: 7

Бренд: Beaphar Страницы: 2

Бренд: Hach Страницы: 36

Бренд: Hach Страницы: 72

Бренд: RadioMaster Страницы: 49

SUPERREMOTE UR19A

Бренд: X10 Страницы: 3

Бренд: Xantech Страницы: 102

Бренд: Xantech Страницы: 17

Бренд: X10 Страницы: 2

FEBCO 860 Small Series

Бренд: Watts Страницы: 12

Бренд: Bardiani Valvole Страницы: 54

Бренд: Parker Страницы: 478

Бренд: Aurora Страницы: 2

Snappi Pushchair

Бренд: Tendercare Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды