Trek 2021 E-CALIBER, Дополнение к руководству по обслуживанию

Страница: 12 / 22

2021 E-Caliber Service Manual
11
Air volume spacer
Item Description Part Number
1 Fox air volume spacer kit 595583
Tools
• BSA30 Open-ended bottom bracket tool
• Spanner pliers
• Loctite Blue 243 threadlocker or similar
• Parallel jaws pliers
• T25 torx drive wrench
• Torque wrench
• Shock pump
• Spacers
• Soft cloth
• Grease
Note: This procedure should be performed with the
IsoStrut installed on the bike.
Note the current air pressure
1. Use a shock pump to check the air pressure in the
shock. Make a note of the current air pressure so you
can re-inflate the shock after changing the air spacer.
2. Gradually bleed the air from the air valve.
Tip: You do not need to compress the shock because
you will need some air in the negative air spring.
Release the shock from the carriage
1. Remove the two bolts and washers at the front of the
shock.
2. Loosen, but DO NOT REMOVE the rear axle.
3. Turn the lockout lever anti-clockwise to the open/
unlocked position.