Trek 2021 E-CALIBER, Дополнение к руководству по обслуживанию

Страница: 2 / 22

2021 E-Caliber Service Manual
1
Contents
Safety 1
Headset with Knock Block
2
Frame and drive system guards 3
Rear triangle and chainstay bridge 4
Main pivot 6
Dérailleur hanger 7
Cabling overview 8
IsoStrut remote lockout cable 9
IsoStrut 10
Air volume spacer
11
Carriage wiper seals and bushings 14
Fazua system 19
Specifications 20
Suspension 21
Safety
WARNING
Always tighten hardware to the specified torque.
Over-tightening hardware could deform or break the
hardware or components. Under-tightening hardware
could cause hardware or components to become loose.
Either situation could damage the bicycle and result in
injury to the rider.
WARNING
All reused-fasteners with a pre-applied threadlocker
must be cleaned with isopropyl alcohol and have new
threadlocker applied before re-assembly. If a threadlock -
er is not applied, the fasteners may loosen, which could
damage the bicycle and result in injury to the rider.
Copyright 2021 Trek Bicycle Corporation All Rights Reserved