Trejon Optimal DS1300, Инструкция по эксплуатации и техническому обслуживанию

Страница: 21 / 36

Operating manual DS1300, DS1500, DS2500 (1001)
trejonindustries.se 21
Basic/factory -adjustment of controlbox.
Trim-pot No. Function Adjustment of trim-pot
1 Feeding auger min.speed (scale value 0) Full clockwise
2 Feeding auger max.speed (scale value 10) 10 turns counter clockwise from zero
3 Spreading disc min.speed (scale value 0) Full clockwise
4 Spreading disc max.speed (scale value 10) 15 turns counter clockwise from zero
(See next page for a review over the adjustment procedure)
2
1
4
3
(fig.7)
1. Adjustment of feeding augers minimum speed.
(value 0 at scale (Pos.2 - fig.6))
2. Adjustment of feeding augers maximum speed.
(value 10 at scale (Pos.2 - fig.6))
3. Adjustment of spreading discs minimun speed.
(value 0 at scale (Pos.1 - fig.6))
4. Adjustment of spreading discs maximum speed.
(value 10 at scale (Pos.1 - fig.6))
(fig.6)
1, Control knob for
spreading disc
at scale value 4
3, Switch for lights
2, Control knob for
feeding auger
at scale value