Trejon Optimal DS1300, Инструкция по эксплуатации и техническому обслуживанию

Страница: 23 / 36

Operating manual DS1300, DS1500, DS2500 (1001)
trejonindustries.se 23
Functions are shut off when control knobs are turned to scale value 0FF until a click is heard.
When stopping during spreading work we recomend that the operation is handled with the
earlier activated hydraulic valve by moving it to opposite position a short while whereafter
valve is moved to neutral position. By this handling both feeding auger and spreading disc
are turned off in the same time as the cylinder (Pos 10 in section 1.3) is shuting the closeing
damper. When restarting the operation the hydraulic valve just have to be moved to ”ON-
position”, at which the earlier settings are saved.
Adjusting of spreading position
With the machines other double acting cylinder (Pos 5 in section 1.3) the spreading positon
can be controled i.e. if spreading area will be centered behind spreader or moved to left or
right side (see picture).
Emergency operation
If control box is out of order, caused by e.g. problem with power supply, the machine can be
operated in a emergency mode. The emergency operation is handled with control knobs at
valve (see picture) by adjusting respective control knob until feeding auger and spreading
disc reach wished speed.
See table for adjustments.
Type of operation Adjustment of respective control knob
Normal operation (with control box) Turn full counter clockwise
Emergency operation (without control box) Turn clockwise from normal setting to wished speed
The machine must be cleaned and oiled each time after you have finished working.
Control knob for spreading disc
Control knob for feeding auger
(fig.9)
Left imagine showing differnt spreading
width depending on speed of spreading
disc.
Right imagine shows variations in
spreading position with help from the
control cylinder. Due to rotation of disc
spreading will not be symmetric.
(fig.8)