Trejon Optimal DS1300, Инструкция по эксплуатации и техническому обслуживанию

Страница: 18 / 36

Operating manual DS1300, DS1500, DS2500 (1001)
trejonindustries.se 18
3.2 Attaching the machine
Warning!
Crushing hazard! When connecting, never stand between the tractor and the equipment
as long as the tractor is moving. The tractor must be immobilized with the parking brake
whenever the operator leaves the cabin.
Warning!
The machine should only be attached to tractors with enough front and rear axle weight so
that steering and brakes function correctly after the implement is attached. Use additional
ballast if necessary, see the tractor’s operation manual.
• The attachment should only be done on a hard level surface.
• Attach tractor to optional connection frame (either to three link connection or to
loader), after that the connection frame can be attach to machine with it’s connection
device. (if machine is connected to a three link connection, the lower lifting arms must
be secured from moving sideways with it’s stabilization rods).
• Switch motor off and immobilized tractor with the parking brake.
• Connect hydraulic hoses to two pairs of double-acting outlets.(one extra double-
acting outlet is needed if machine is equiped with self loading device). Clean
connections well before attaching in outlet.
• Mount control box in a suitable place in tractor cabin. Attached 7-pole connector of
control box to connection at machine (Pos.18 in section 1,3). Connect power supply
plug from control box to 12V outlet in tractor (Pos.29 in fig.3 for ELSK, and Pos.17 in
fig.4B for ELMP) (if just 24V is available in tractor, coils at valve and lamps must be
excanged)
• Check if machine goes free from tractor in all thinkable situations.