11
April 14, 2018
Description
12H / 24H hour time.
The hours are displayed in 12 or 24-hour mode.
Default: 24H mode.
Blank leading “0”.
Blank out the leading “0” from single digit hours.
Default: Don't blank.
Scroll back.
Use the scroll back (rapid count down) effect when changing
from “9” to “0”.
Default: enabled
Suppress ACP when dimmed.
The Anti Cathode Poisoning which runs during the
night lights the digits
up at full brightness, and some people might find this disturbing.
Using this setting, you can stop ACP happening when the display is fully dimmed (e.g.
at night).
Default: Enabled.
Display blanking.
To preserve the tubes, you can set the display to be blanked. Note
that blanking can
be overridden from the clock, see the section below.
Options:
• “Never blank”: the display runs all the time
• “Blank all day on weekends”: the display is blanked at weekends.
• “Blank all day on week days”: the display is blanked on week days.
• “Blank always”: The display is always blanked unless you tell it to come on.
• “Blank during selected hours every day”: Blank between the start and end hour
every day, week days and weekends.
• “Blank during selected hours on week days and all day at weekends”: The
display is blanked during the hours you define during week days and all day at
weekends.
• “Blank during selected hours on weekends and all day on week days”: This
blanks the clock during the selected hours on weekends and all day on week
days.
• “Blank during selected hours on weekends only”: This blanks between the start and
end hour on weekends.
• “Blank during selected hours on week days only”: This blanks between the start
and end hour on
week days.
Default: “Never Blank”
Blanking From.
Hour blanking will start at this hour, on the days set by the Display
Blanking Mode. If
the display blanking mode does not use hours, this setting is not
enabled.
Blanking To.
Hour blanking will end at this hour, on the days set by the Display
Blanking Mode. If the
display blanking mode does not use hours, this setting is not
enabled.
