16
April 14, 2018
Basic Settings
“00”
Flashing
12 or 24-hour time.
The hours are displayed in 12 or
24-hour mode
“1” = 12 hour
“0” = 24 hour
default: 1
“01”
flashing
Blank leading “0”.
Blank out the leading “0” from single
digit hours
“1” = blank
“0” = don't blank
default: 1
“02”
flashing
Scroll back.
Use the scroll back (rapid count down)
effect when
changing from “9” to “0”.
“1” = enable
“0” = disable
default: 0
“03”
flashing
Fade
. Use cross digit fading
“1” = enable
“0” = disable
default: 1
“04”
flashing
Date format
. Set the format that the date is displayed
in
“0” = YY.MM.DD
“1” = MM.DD.Y
Y
“2” = DD.MM.YY
default: 1
“05”
flashing
Display blanking
. To preserve the tubes, you can set
the display to be blanked.
Options:
“4” = “hours”: Blanks between the start and end hour
every day.
“5” = “H or weekends”: This blanks all day during the
weekends and between the start and end hour every
other day.
“6” = “H or week days”: This blanks all day during the
week days and between the start and end hour every
other day.
“7” = “H on weekends”: This blanks between the
start and end hour on weekends.
“8” = “H on week days”: This blanks between the
start and end hour on week days.
“0” = Don't blank
“1” = Weekends
“2” = Week days
“3” = Always
“4” = Hours
“5” = H
or
weekends “6” = H
or
week days “7” =
H
on
weekends
“8” = H
on
week days’
default: 0
“06”
flashing
Blanking Hour Start.
Hour blanking will start at this
hour, on the days set by the Display Blanking Mode. If
the display blanking mode does not use hours, this
setting is not shown.
Default: 00
